During the printing process, scraps, toner dust and dirt can accumulate in the laser printer, especially when you use recycled paper to print.

          Over time, the buildup of dust and dirt can lead to poor quality printing or paper jam and indirectly shorten the lifespan of the printer or its parts.

          If you follow the steps to regularly maintain your laser printer, it can help extend the lifespan of the printer:

          Please turn off the printer and remove the toner cartridge from the printer.  Wait until the machine has cooled down and take the following steps:

                (Attention: Please do not place the toner cartridge under the sun or expose it to strong light.)

          Please use a soft brush to brush off dust on the body of the machine and between the gaps.

          Use a soft, slightly damp cloth to clean the body of the machine (but avoid touching any of the buttons).

          After removing the toner cartridge, use a new soft brush to remove any buildup inside the printer.  Then use a dry, soft, lint-free cloth to clean areas inside the paper tray and the toner cartridge slot.

          Attention! Please avoid touching the roller inside the printer to avoid damaging the printer. Place the toner cartridge back into the slot.

          Put the cover back on and switch the printer on.  After warming up, use the function of "clean print cartridge" to print out a test page.

          Different laser jet printers have different "clean print cartridge" functions. Please read your user manual.

          Regular maintenance and appropriate use of the "clean print cartridge" function can help improve the quality of printing and extend the lifespan of your printer.

  

           All trademarks and logos appearing on the site are the property of their respective owners. These trademarks and logos are used only to indicate the compatibility of the products produced by CyberTek;

           CyberTek is not connected to any of these companies.

           For cartridges with embedded chips, CyberTek will replace the chips with new and compatible ones before shipping.

           User Instruction:

           1. Please switch off the power of your printer before changing the cartridge.

           2. After removing the packing of the toner cartridge, please shake the cartridge horizontally 3 to 5 times.

           3. Put the cartridge on a flat surface, and remove the seal slowly. (If the cartridge does not come with a seal, please skip this step.)

           4. Remove the old cartridge from the printer and put the new cartridge from CyberTek in place. 

           5. Switch on the power of the printer.  After warming up, use the function of "clean print cartridge" to print out a test page.

           6. Please call the toll-free number 0800-030-080 if you encounter any technical problems.

 

 

Download drivers for your printer.

IBM

http://www.ibm.com/support/tw/zh/

HP

http://welcome.hp.com/country/tw/zh/support.html

Kyocera

http://www.kyoceramita.com.tw/download/index.html

Canon

http://www.canon.com.tw/download/downloadsDriver.asp

Fujixerox

http://www.fujixerox.com.tw/

Ricoh

http://www.ricoh.com.tw/

SHARP

http://www.sharp.com.tw/

EPSON

http://w3.epson.com.tw/epson/index.asp

Brother

http://www.brother-office.com.tw/

SAMSUNG

http://www.samsung.com/tw/

Lexmark

http://www.lexmark.com

Miscellaneous Information:

I'm the owner of this store.